Wayne RUP160 1/6-Horsepower 3,000 GPH Oilless Submersible Utility Water Pump

Thursday, March 15, 2012

Wayne RUP160 1/6-Horsepower 3,000 GPH Oilless Submersible Utility Water Pump

You Save : $16.63 (24%)

Product Description

Amazon.com Product Description
The Wayne 1/6 HP 2,000 GPH oilless submersible utility water pump pumps out up to 2000 gallons per hour with its power efficient motor. It's created for use in continuous duty applications, like draining flooded basements, sinks, tubs, or stock tanks, or emptying water-filled boats. The influence and corrosion-resistant housing, volute, and impeller ensures durability, and the bottom suction can get water within 1/8-inch of the surface. A 3/4-inch adjustable discharge adapter connects to garden hoses, and the 1-1/four-inch discharge port supplies high-volume efficiency. Wayne backs its pump with a one-year restricted warranty.
1/6 HP motor has thermal-overload protection to prevent burn out. Oil-less motor design for environmentally secure operation. HP: 1/6, Flow (GPH): three,000, Volts: 120, Max. Total Head (ft.): 20, Discharge Port (in.): 1 1/four, Volute: Impact resistant, Impeller Shaft: Influence resistant, Power Cord (ft.): 9, Dimensions L x W x H (in.): 7 1/four x five 3/4 x ten 3/four

Technical Details

1/6-horsepower submersible utility water pump with energy efficient motor
Designed for continuous duty operations
Removes water within 1/8 inch of surface
Pumps up to 3,000 gallons per hour
1-year limited warranty

Consumer Reviews

Some Required Information
Whenever I see such disparities in reviews, it makes me wonder why some folks are having such poor outcomes. A single assumes that they have to be undertaking something very incorrect in order to have such a item not perform as expected. However my encounter with the Wayne RUP160 1/6-Horsepower 3,000 GPH Oilless Submersible Utility Water Pump tends to make me appreciate each the positive and unfavorable testimonials.
Very first of all, according to the manufacturer:
1. At least ½ inch of water is necessary to prime and operate the pump
2. The pump should not be operated if the water level is three/8 inch or less
3. There is no mention of "the bottom suction can get water within 1/8-inch of the surface"
four. A discharge hose of 1-1/4 inches really should be utilized
five. In spite of a three/4in. adjustable discharge adapter which connects to common garden hose I could not find it listed that a garden hose would be acceptable
6. Do not permit pump to run dry. The shaft seal depends on water for lubrication. Operating pump with out water will harm the shaft seal and trigger pump failure.
So, soon after finding a "secure space" in our temporary rented household to have around 1 inch of stagnant water in it which was next to my bedroom I decided to get this pump to transfer water to a 2 foot holding tank (this was right after acquiring to larger sump pumps which includes the Little Giant 6-CIA, 1/three HP, 45 GPM - Automatic Submersible Sump Pump, 10' power cord (506168) which would then pump the water out a 1 ½ inch hose).
I bought this pump with the Apex 15-Foot Connector Hose Remnants REM 15 (which was listed as five/8" x 15') which connected to the garden house adapter, drop it into the water and turned it on. I could hear the pump operating but absolutely nothing was coming out my 15 foot hose which was lying on the ground. To be confident, I placed the pump in a 12 inch bucket of water and nevertheless no water was coming out the hose. Feeling confused and beginning to really feel that this space would under no circumstances be dry I took off the hose, dropped the pump back into the 1 inch water and presto water started flying out the pump at least 4 or five feet and bouncing off the wall. I concluded the 15 foot hose was to extended and cut the hose into but nevertheless no luck. I continued shortening the garden house till it was roughly 12 - 18 inches and finally got adequate water flow to fill up my holding tank. Note I haven't hooked it up to a 1-1/4 inch discharge hose yet.
So my principal conclusions would be:
1. Strongly look at working with a 1-1/4 inch discharge hose for beneficial outcomes
two. If you are searching a water levels regularly less than ½ inches consider a different pump
three. Prime the pump in at least ½ inches of water
four. Bear in mind not to let the pump run dry
Addendum: Please see history above. On July 17, 2009 I took off the garden hose adapter and the three/8 inch garden hose and employed the Tiny Giant SDHK114 1-1/4 Inch-by-24-Foot Sump Pump Discharge Hose Kit and what a difference. This tiny pump was easily pumping water at least ten - 12 feet straight up with no troubles.
I will for this reason raise my rating to four stars and strain:
1. Use a 1 1/four discharge hose
two. Minimum water level three/8 to 1/two inches
3. Do not run dry and the pump does not shut off automatically
four. I would forget about the garden hose and garden hose adapter

The pool was closed a month ago, and there had been some severe rainfall over the past few weeks. Almost 2500 gallons of rainwater laid atop our pool cover (500 sq ft x 1 ft of water), and our old pool cover pump had died. The pump arrived yesterday (01Nov07), turned it on and 2.5 hours later, the pool cover was dry (1800 to 2030 hrs)! This job would have taken our old Jacuzzi (or the tiny giant) pool cover pump many hours to complete. This is a awesome decide to buy! Equivalent utility pumps at the home depot and lowes are at least 2X the price tag!
The instructions were also particularly clear, with troubleshooting tips if the pump begins to malfunction. This was not on the market with our preceding pool cover pumps, which we paid at least $100 for.
Rather than keeping this pump in the shed, it is now stored in a special location in the basement. All Hail the Wayne!